AKCess Pro Security Sensor

The security sensor of our partner AKCP Inc. is a magnetic switch to monitor monitor doors, windows and server cabinets.

The security sensor

The Security sensor with an ALARM/NORMAL indication in software.You can have an unlimited number of security sensors. Security sensors can detect doors, windows. SNMP interface for alarm/normal status. SNMP traps sent when critical. SNMP polling via get available.

Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.

24x7x365 access control of sensitive infrastructures

How will you know when weekends or after office hours your mission-critical facilities be entered?

Who will alert you if your server cabinet is opened? How can you tell whether the doors are closed in your office? Here is the answer: Increase security in your rooms by installing the sensor Security / magnetic contact and the associated network-based sensorProbe & securityProbe IP Alarm Server!


  • Power source: powered by the sensorProbe/securityProbe.
  • No additional power needed
  • sensorProbe/securityProbe autodetects the presence of the security sensor
  • Up to 2 security sensor per sensorProbe2, 8 per sensorProbe8 and securityProbe
  • Full autosense including disconnect alarm

AKCP Security Sensor


The Security Sensor is a magnetic on/off switch for monitoring doors and windows. When the door, or window, opens the input signal is detected by the AKCP sensorProbe or securityProbe base unit. Alerts can then be generate to notify you even including images captured from an attached camera to give you instant visual feedback on the situation.


from 75,00 Euro*


Monitoring System 100 III - buy now


The advanced monitoring system 100 III is the entry level model of the high-end surveillance systems from Didactum. This monitoring appliance is designed and manucactured within the EU. The engineering and support of the Didactum monitoring systems are located in Germany.


from 239,00 Euro*



  • Measurement range: Alarm / Normal
  • Magnetic Contact Message Open / Closed
  • Cable: CAT5 / RJ-45 connector
  • Any number of security sensors can be connected in series / chained
  • Power is supplied via AKCP monitoring device
  • SNMP OID for network management systems integration e.g. Nagios or OpenNMS
  • AutoSense function
  • Disconnect Alarm
  • AKCP sensor is labeled with sticker for quick installation